Capability and capacity Table diameter in  57.09  78.74 (2000)
Maximum swing in  78.74  94.49 (2400)
Maximum height from table top to ram bottom in  67.72 
Maximum cutting height in  61.02 
Maximum cutting diameter in  78.74  94.49 (2400)
Maximum cutting force of ram in  5508 
Maximum table load lbs  17600  33070 (15000)
Travel Horizontal travel of rail head (X-axis) in  -3.94 ~ 45.28 -1.97 ~ 53.15 (-50 ~ 1350)
Vertical travel of ram (Z-axis) in  35.43 
Vertical travel of arm (Not NC axis) in  39.38 
Table Table speed rpm  Low: 2 ~ 100 High: 8 ~ 400 Low: 2 ~ 60 High: 8 ~ 240   (2 ~ 240)
Maximum torque ft-lbs 15435 23153 (31396)
Live Spindle [TUE(S)] Rotation speed min¯¹ 15 ~ 3000
Maximum torque ft-lbs  171.8 
Feed Rate Rapid traverse rate of rail (X-axis) in/min  590.55 
Rapid traverse rate of ram (Z-axis) in/min  472.44 
Feed rate (X, Z-axis in/min  0.04 ~ 78.74 
Rapid traverse rate of table (C-axis) [TUE(S)] deg/min 720
Feed rate of table (C-axis) [TUE(S)] deg/min 1 ~ 360
Ram Section in  9.84 x 9.06
Tool Type of tool shank 7/24 taper JIS 50T and Dia. 145mm flange
Type of pullstud 50PU
Motor Table drive motor (30min/cont.) HP  VAC 60/50
Spindle drive motor (30min/cont.) [TUE(S)] HP  VAC 24.8/20 
Feed servo motor HP  5.4 
Power Source Electrical power supply AC200/220V, 50/60Hz
Power capacity kVA 80
Machine Size Height in  17.72 18.21 (5550)
Floor area in  16.73 x 12.30  18.37 x 14.44 (5600 x 4400)
Machine weight lbs 37480 47840 (21700)
Accuracy Positioning accuracy  X-axis in  ±0.0003/40
Z-axis in  ±0.0003/40
Positioning repeatability accuracy (X, Z-axis) in  ±0.00012
Positioning accuracy (C-axis) [TUE(S)] arc-sec ±10" per 360°
Positioning repeatability accuracy (C-axis) [TUE(S)] arc-sec ±5"